Troubleshooting • Re: Raspberry Pi 4 Model B Freezes
Could be a fake microSD card - write and verify using RPi Imager to see if the same happens, but wait 10 minutes after first to boot to allow it to resize the partition etc.or pulling the power has...
View ArticleOther RP2040 boards • Re: Boot issue in multi-board setup with I2C
Makes sense. Thank you!Statistics: Posted by pini.grigio — Tue Dec 05, 2023 7:54 pm
View ArticleGeneral discussion • Re: Can RPi5 run binaries compiled on RPi4 bookworm?
You cannot assume that it will work, but some of it might. With Linux, you should always compile code on the host where possible.Statistics: Posted by NotRequired — Tue Dec 05, 2023 7:54 pm
View ArticleClik here to view.
Raspberry Pi OS • Re: Firefox Is Laggy
i just did the install again but my way.just got into the gui right now.this time i add firefox to the install so i didn't have to remove firefox-esr.i set my .bash_aliases file in there before boot...
View ArticleGeneral discussion • Re: Desktop crashes.
I have had this same issue. Mostly when working in Thonny, but I do have Chromium open in the background. I am on a RPI 5 with 8GB. I would say it has happened about half a dozen times. Once even...
View ArticleTroubleshooting • Re: RPI5 Disk corruption using an external USB boot volume?
Sadly, I haven't found a way to send a safe shutdown message to the nvme drive yet... doesn't work for the nvme drive.Of course it doesn't. Device name /dev/sda is not right. Probably it's starting...
View ArticleTroubleshooting • Re: VLC issues with Pi4
Visually VLC gives the impression of turning the display off/on as it goes in/out of full screen. Another manifestation I've noticed is, when it doesn't crash (the pause resize play fudge) it might...
View ArticleNetworking and servers • Re: rPi 5 as useable NAS
If next year some company creates a 12V 5A PSU that can feed SSD + 3.5inch HDD + Pi5 + PCIE-SATA bridge, I might consider making a NAS with a Pi5. My current one is an Intel board with 2x SATA and...
View ArticleRaspberry Pi OS • Re: Bullseye on raspberry pi 5?
Indeed but since pi has an official touchscreen then it should work out of the box. Like I use my pi as a server and the screen for checking stats and stuff... It should be a bit easier to set up an...
View ArticleBeginners • Re: Virtual desktop and VNC on Raspberry Pi 5
Thanks, everyoneThere must have been a patch that fixed the problem, as I haven't changed anything on my end other than apply the Bookworm updates.So, I am working now.Statistics: Posted by cag61 —...
View ArticleMedia centres • Re: Peppy player
I am trying to install a classic Christmas radio stream but the URLs I am finding with Google do not play.Could someone either give me a URL that works or help me understand what I need to do to get...
View ArticleAutomation, sensing and robotics • Re: Remote controlled antenna (horozontal...
You want to turn the antenna, and not the mount. So why don't you setup your mount with a 'dead accurate' position. Use a reference switch (or two) to calibrate your zero and a stepper motor with a...
View ArticleClik here to view.
Advanced users • Re: Mainline support status?
Yes, a central GitHub issue to track progress would be great I am also interested in having mainline support for the Raspberry Pi 5 — my Go appliance platform https://gokrazy.org/ runs on the...
View ArticleSDK • Pico W generates error after using TCP for a while
Hello everyone, Not sure why this is happening but after some time my Pico W will panic with this errorCode: *** PANIC ***pcb->snd_queuelen >= pbuf_clen(next->p)I'm using the Pico W in...
View ArticleClik here to view.
Beginners • Re: Windowed view of RPi environment on PC
How about an HDMI to USB capture card connected to the PC (USB) and to the pi4/5 HDMI ?- or does workplace not allow USB devices...?This looks promising, I didn't know these existed. So I would just...
View ArticleAdvanced users • Re: Disabling LED on ICE tower cooler
That's to be expected:Code: $ pinctrl FAN_PWM op dh # Make FAN_PWM an output, driving high - fan should stop$ pinctrl FAN_PWM op dl # Make it an output, driving low - fan should run at full speed$...
View ArticleTroubleshooting • Re: RP5 installs then fails update unmet dependencies...
I don't have a fix. Just noting that on a Pi02W and a Pi5 I got:Code: The following packages have been kept back: raspi-utilswhen I did an apt upgrade. Haven't chased it any further, but there's...
View ArticleOther projects • Re: Thermal Printer Firmware with RPI 3a+ Troubleshoot
Are you sure it's "pc936"?Anyway, you need to try setting the code page to your own language, assuming it's not Chinese.The ESC/POS command for setting Code Page is 'ESC t n' (ASCII) or '1B 74 n'...
View ArticleAdvanced users • Re: Disable partition resizing on bookworm 1st boot
Below is a snippet of what I use. It works on any version of Raspberry Pi OS.This snippet assumes the ROOT partition is mounted on /mnt and the BOOT partition is mounted on /mnt/boot (non-Bookworm) or...
View ArticleAdvanced users • Question about model specific vc4-kms-v3d drivers
I see in /boot/overlays/README that there are model-specific flavors of vc4-kms-v3d. If I simply boot with dtoverlay=vc4-kms-v3d,cma-512 on a RPi5 will it automatically use the equivalent of...
View Article