Thank you for providing insight.
This is the first touch screen: https://www.ebay.com/itm/334731484309
The manual that came with my SpotPear was this one:
https://www.spotpear.com/index.php/inde ... d/715.html
I contacted their forums, and this one was recommended(I'm not sure if it was an official suggestion though).
https://www.spotpear.com/index/study/de ... /1210.html
I ended up using the gt911 instructions worked except for approximately every other boot the screen didn't come up.
I tried the second, and it didn't boot at all. I went back to the gt911, and applied fkms driver, then it booted every time but the touch screen didn't work. Finally, I applied the HAR driver in 1210 with fkms and it worked.
Now the sway nag doesn't work for shutdown.
Raspberry pi 4b thanks!
This is the first touch screen: https://www.ebay.com/itm/334731484309
The manual that came with my SpotPear was this one:
https://www.spotpear.com/index.php/inde ... d/715.html
I contacted their forums, and this one was recommended(I'm not sure if it was an official suggestion though).
https://www.spotpear.com/index/study/de ... /1210.html
I ended up using the gt911 instructions worked except for approximately every other boot the screen didn't come up.
I tried the second, and it didn't boot at all. I went back to the gt911, and applied fkms driver, then it booted every time but the touch screen didn't work. Finally, I applied the HAR driver in 1210 with fkms and it worked.
Now the sway nag doesn't work for shutdown.
Raspberry pi 4b thanks!
Statistics: Posted by SmoothOperator — Thu Mar 28, 2024 6:08 pm